Dadanco Latest News

1/27/2012 DADANCO referenced in The Blue Banner - UNC Asheville's student newspaper

Check out this article at http://www.thebluebanner.net/news/177-new-construction-features-save-money-energy.

1/16/2012 IMAGINiT Technologies Uses DADANCO As An Example

Check out the Design Engineering article "Removing Design Bottlenecks" by Scott Hale from IMAGINIT Technologies...

"The problem was that Dadanco had relatively few standardized Inventor templates for their product lines. They used previous drawings that were “close” to those needed for the new order and made alterations to fit the new order, including mountings, bolts, coils, nozzles, etc. This meant that for each custom product, they had to go through the entire modeling process, part by part." Click to read more! http://www.canadianmanufacturing.com/design-engine

1/5/2012 DADANCO AT AHR EXPO IN CHICAGO

Are you going to the AHR EXPO in Chicago this January 23rd - 25th? Stop by our booth #4569!

Hope to see you there!

11/3/2011 Autodesk Inventor Makes Chilled Beams iLogical

ImaginIT_BIG_IDEAS_Conference_DADANCO_Presentation.zip

This presentation was given during the ImaginIT BIG IDEAS conference. The webinar discusses the use of Intentor and Vault to assist in the manufacture of Active Chilled Beams.

10/12/2011 Daniel Harris presenting at the Imaginit BIG I.D.E.A.S. Event Thursday, October 27, 2011 1:30pm – 2:00pm Inventor Makes Chilled Beams I-logical

For more information about this event please click below:

http://www.imaginit.com/lp/big_ideas/index.html

For reasons to attend this event please follow this link http://blogs.rand.com/imaginitnews/2011/10/top-reasons-manufacturing-users-should-attend-the-big-ideas-event.html

10/3/2011 Transform Your Building!

Come and see us at the Greenbuild 2011 where we will demonstrate how you can transform your building! Check out our animation that will be shown at our booth #6534S:

http://www.youtube.com/watch?v=QukoqPQOM-Y

9/21/2011 Active chilled beams are now allowed to be used in health care facilities

Please follow the link below for more information.

http://bit.ly/nOdhhk

3/21/2011 Selection Software V4.0

DADANCO_Selection_Software_V4_0.xlsm

We are pleased to announce the release of Version 4.0 of the excel based selection software program. There have been some improvements and additions to the last version that you will find useful.

A brief summary of the some key changes are detailed below:-

· Link to our Revit files
· Video tutorials
· BIM data output that integrates with REVIT MEP
· Adjustable coil air on temperatures
· Scheduling sheet

We have created some training videos about using this software that can be accessed through our YouTube channel. We will continue to add new content on a regular basis, feel free to follow us to always stay informed.

Please pass this email or links on to your consultants or those that you believe would be interested in selecting Active Chilled Beam, Inffusers and Induction Units.

3/3/2011 Software Training Videos "Creating Intelligent BIM data and using ACB's in Revit MEP."

http://www.youtube.com/watch?v=Outvyc0_Vck

This video shows how to use the software to create intelligent BIM models of Active Chilled Beams and then load them in Revit MEP.

2/23/2011 Dadanco ASHRAE Presentation - Quebec City March 14

Infobec_fev_2011.pdf

Join us in Quebec City at the ASHRAE Chapter meeting to talk about Active Chilled Beams in Quebec.

Archived Articles