Inffuser Product Range
DADANCO Inffuser™ designs have been developed using the patented nozzle technology.
DADANCO units can be provided to fit into a standard T-bar ceiling, dry wall/plaster
ceilings and other ceiling types as required.
Our product range covers the following Inffuser styles and grille lengths:
-
Square 4-way discharge (2 x 2 feet).
-
Linear slot 1 or 2-way discharge. Nominal unit lengths of 2, 4
and 6 feet are available, or as a continuous slot.
-
Under-floor vertical discharge.
Unit lengths to match the floor tile sizes.
Our Inffusers deliver superior Indoor Environment Quality (IEQ) and Air Change Effectiveness
(ACE) in both perimeter and interior zones.
Types of INFFUSERS
INFFUSER™ solutions are available with a variety of conventional outlet designs to
suit any HVAC application.
|
 |
|
IDL10e&i
1-way discharge linear style supply air outlet designed for secondary air entrainment
from the conditioned ceiling plenum or from the room.
Ideally suited for perimeter zones and small internal zones where single-way supply
air distribution is required.
|
 |
|
|
IDL20e&i
2-way discharge linear style supply air outlet designed for secondary air entrainment
from the conditioned ceiling plenum or from the room.
Suited for perimeter and internal zones where 2-way supply air distribution is required.
|
 |
|
|
IDS60e
Square louver face style supply air outlet designed for secondary air entrainment
from a conditioned ceiling plenum.
Suitable for perimeter and internal zones.
Nominal grille size: 2’ x 2’
|
 |
|
|
IDS60i
Square louver face style supply air outlet designed for secondary air entrainment
directly from the room space.
Suitable for perimeter and internal zones.
Nominal grille size: 2’ x 2’
|
 |
|
|
UDI
Underfloor Inffuser for with 1 or 2-way blow supply air linear style supply
air outlet designed for secondary air entrainment from the room.
Nominal unit size to match floor tiles.
|
 |
|
